wall insulation that you can rely on - for life
You can achieve that impossible dream of super insulated, dry walls, that also happen to be great at stopping noise. Super-Insulated walls are not the sole preserve of the super wealthy. Super-insulated walls whether they are internal or external need not only be available in fancy foreign building systems with words like “HAUS” tagged onto the end of them.
Discover the secrets of how you can create super insulated walls without being a CIVIL ENGINEER or a MECHANICAL ENGINEER, and it doesn’t matter whether your walls are already built or if you are about to start building.OK Lets start with some basics;
If not properly insulated Walls can make your life really uncomfortable .30% of your annual heating bill can escape out through your external walls and noise can travel through them.
Let’s face it the vast majority of external walls are made from either bricks or blocks. All very fine but blocks and bricks while strong and durable are pretty bad at insulating and very good at transmitting noise.
In the past most walls were constructed using ventilated cavities (see our cavity insulation page ) and even if you were lucky enough to have some insulation in your cavities, it turns out that insulation was little better than useless. Draughts was the big drawback, circulating in the wall cavities and like a “hoover” sucking the heat out of your home and making you and your loved ones miserable.
Even though most external walls today are now airtight you still have the problem of the wrong type of wall insulation being used.
Let’s put it this way. If you use the same wall insulation that has been used in homes and buildings for the last 50 years, you’re going to get the results that most of us had to endure for the last 50 years, which is a freezing cold, hard to heat home or building.
Wall Insulation materials that come in sheets and rolls have a fundamental drawback. They are next to impossible to seal properly. To stop heat escaping ideally you need a seamless barrier across your insulation. If there’s jagged edges and uneven joints in your glassrockwool or fibre board’s then your U values will be degraded
The other shocking thing about most common types of wall insulation is that when they get damp, they sag, they curl, they pull away from the surfaces they were meant to insulate and when they do that they become useless.
The shocking fact is most modern homes and buildings today are still using old and ineffective wall insulation systems.The ideal nsulation for the modern home or building has to be seamless, airtight, have great U values and not be affected by dampness or moisture.
Fusion Spray foam hits all those targets in the bullseye.
If you are building new or just renovating you can achieve super-insulated airtight and acoustically super quiet walls.
Your home and your building will be the envy of all your friends and all it takes is simply to specify Fusion Biofoam Insulating foam
Sprayfoam is radically different to any other types of wall insulation in that it acts in synergy with your wall construction to lock out cold and significantly reduce the transmission of noise. Sprayfoam rapid set rigid foam has class leading U values, but that’s not all. Sprayfoam when sprayed onto one side of your walls, whether they are exterior walls or internal stud partition walls, sticks to the sheet rock and timber and then does something really spectacular. It expands to over 50 times its original volume and seals forever, locking rigidly between your timbers.
Certified Foam is performance guaranteed for life and it won’t shrink, warp or loose its insulating abilities .You’r probably thinking “Hey this stuff is great but it’s going to be really difficult to convince my builder to install this”
Well here’s the great news . Fusion Insulation applies this foam for you. We do the work for your builder so he doesn’t have to worry and he doesn’t have to store bulky insulation on site.
It’s fast too.
Our foam is fully NSAI certified and approved for use across Ireland
Phone us NOW! for a NO OBLIGATION FREE QUOTATIONCall us:
For Quote -
01 657 1858
or
For Technical Queries Mobile: 0872416181
Discover the secrets of how you can create super insulated walls without being a CIVIL ENGINEER or a MECHANICAL ENGINEER, and it doesn’t matter whether your walls are already built or if you are about to start building.OK Lets start with some basics;
If not properly insulated Walls can make your life really uncomfortable .30% of your annual heating bill can escape out through your external walls and noise can travel through them.
Let’s face it the vast majority of external walls are made from either bricks or blocks. All very fine but blocks and bricks while strong and durable are pretty bad at insulating and very good at transmitting noise.
In the past most walls were constructed using ventilated cavities (see our cavity insulation page ) and even if you were lucky enough to have some insulation in your cavities, it turns out that insulation was little better than useless. Draughts was the big drawback, circulating in the wall cavities and like a “hoover” sucking the heat out of your home and making you and your loved ones miserable.
Even though most external walls today are now airtight you still have the problem of the wrong type of wall insulation being used.
Let’s put it this way. If you use the same wall insulation that has been used in homes and buildings for the last 50 years, you’re going to get the results that most of us had to endure for the last 50 years, which is a freezing cold, hard to heat home or building.
Wall Insulation materials that come in sheets and rolls have a fundamental drawback. They are next to impossible to seal properly. To stop heat escaping ideally you need a seamless barrier across your insulation. If there’s jagged edges and uneven joints in your glassrockwool or fibre board’s then your U values will be degraded
The other shocking thing about most common types of wall insulation is that when they get damp, they sag, they curl, they pull away from the surfaces they were meant to insulate and when they do that they become useless.
The shocking fact is most modern homes and buildings today are still using old and ineffective wall insulation systems.The ideal nsulation for the modern home or building has to be seamless, airtight, have great U values and not be affected by dampness or moisture.
Fusion Spray foam hits all those targets in the bullseye.
If you are building new or just renovating you can achieve super-insulated airtight and acoustically super quiet walls.
Your home and your building will be the envy of all your friends and all it takes is simply to specify Fusion Biofoam Insulating foam
Sprayfoam is radically different to any other types of wall insulation in that it acts in synergy with your wall construction to lock out cold and significantly reduce the transmission of noise. Sprayfoam rapid set rigid foam has class leading U values, but that’s not all. Sprayfoam when sprayed onto one side of your walls, whether they are exterior walls or internal stud partition walls, sticks to the sheet rock and timber and then does something really spectacular. It expands to over 50 times its original volume and seals forever, locking rigidly between your timbers.
Certified Foam is performance guaranteed for life and it won’t shrink, warp or loose its insulating abilities .You’r probably thinking “Hey this stuff is great but it’s going to be really difficult to convince my builder to install this”
Well here’s the great news . Fusion Insulation applies this foam for you. We do the work for your builder so he doesn’t have to worry and he doesn’t have to store bulky insulation on site.
It’s fast too.
Our foam is fully NSAI certified and approved for use across Ireland
Phone us NOW! for a NO OBLIGATION FREE QUOTATIONCall us:
For Quote -
01 657 1858
or
For Technical Queries Mobile: 0872416181